Laboratory Safety Rules

No eating or drinking is permitted in the laboratory.
No open food or beverage can be taken into the laboratory. Please leave food on the table outside of the lab.
Lab benches are to be kept free of extraneous items while conducting experiments. This includes personal items such as backpacks, cellphones, and unnecessary books. All personal items should be put in the designated cabinets.
Students must wear closed-toe shoes that cover the top of the foot and appropriate clothing at all times in the laboratory.
Keep hands away from your face, eyes, and mouth when working with chemicals or microorganisms. This includes not applying cosmetics, not adjusting contact lenses, and not biting your fingernails.
Long hair should be pulled up and out of your face while in the laboratory.
If any chemicals or other agents splash into your eyes, immediately go to the nearest sink and flush your eyes with water.
Report ANY and ALL accidents, spills, BREAKAGES, or injuries to the instructor, no matter how trivial they appear.
Do not removed samples, reagents, or other materials from the laboratory unless specific permission from the instructor has been granted.
Do not use any lab equipment without instruction and authorization from the instructor. Report any damaged or broken equipment to your instructor immediately.
Students must assume that all of the organisms they work with in this laboratory are potential pathogens (disease-producing microbes).

[Lab Sign]. (n.d.). Bing

Cleaning Lab Equipment

Here, at GHC, we are so fortunate to have the amazing science labs we have and the state-of-the-art equipment we have within our facility. It is so important we take care of our equipment. Just a couple of notes of how to clean the lab equipment we'll be using for the research project. The only person who should be disposing of samples are those putting data into the spreadsheet. Please let SAMANTHA or LAUREN know if you are interested in entering data. Equipment should be cleaned with water. At most if you need to wipe out a cylinder after using it due to residue, a paper towel should do the trick. Should you need something more to clean equipment, you will use acetone. Acetone will be available in our lab sometime through the semester, but again, you really shouldn't need more than water. We really want to avoid cleaning our equipment with soap. It is very hard to clean soap off glass. Make sure to leave glassware to dry. The person who comes in the morn...

Processing Chemical Analysis Samples

Don't let the words "processing chemical analysis" overwhelm you! It is so easy once you do it a couple of times! You'll be working from memory before you know it! We will be collecting from FOUR different sites for SUMMER SEMESTER 2021 . You can find the addresses and some photos of the sites under the "SITES" tab. We are currently running SIX chemical tests on the samples. For SUMMER 2021 , we will be testing for the following: Sulfate HR (High Range) Ammonia Nitrogen HR Nitrate-Nitrogen LR (Low Range) Chlorine (FREE/TOTAL/COMBINED) pH Phosphates Each test has it's own set of very to follow instructions. You can find these instructions in the binder in the lab. They are also listed here on the website for your convenience. Check under CHEMICAL ANALYSIS INSTRUCTIONS in the drop down menu on our site to find them digitally! EXAMPLE #1 ~ SULFATE Turn on calorimeter ENTER into testing menu (it should already be highlighted) Use arrow keys to toggle (an...

Collecting Microbiology Samples

Sample Collection/Field Kit E. coli are naturally present in our guts, therefore, we have to avoid any contamination of the samples. Put on gloves (make sure the glove bag stays closed as much as possible to avoid contaminants). Wipe gloved hands with alcohol. Collect water from 1" below the surface in large bottle and pour into small bottle (SHAKE VIGOROUSLY) Label bottles with a sharpie (Please make sure the labels are readable for the data pe rson) . Once collected, samples are put on ice until the are ready to be processed at the lab. The ice ensures that any bacteria in the sample doesn't grow in the meantime. **Samples are processed within SIX hours of collection** Rinse large collecting bottle with deionized water for the next site collection (Prevent cross-contamination). Place all dirty gloves and trash in provided paper bag. Keeping the samples cold with icepacks and processing in a timely manner ensures that bacteria don't have time to gr...